Info: 'If you select the 'Skip with Shift Key' option, then you can skip any INIT by just depressing the Shift key as it is about to load. '
1:
Bounds: x1=17, y1=78, x2=282, y2=166
Type: 8
Info: 'INIT-Scope will emit a short beep and will delay about 2 seconds so that you can release the Shift key before the process continues.'
DITL_-4050.txt
Items: (2 entries)
0:
Bounds: x1=17, y1=4, x2=252, y2=115
Type: 8
Info: 'If you check the 'Intercept with Option Key' box, then you will be able to drop into the debuger just as an INIT is about to execute. All you need do is depress the Option key just before the INIT is loaded.'
1:
Bounds: x1=17, y1=118, x2=264, y2=192
Type: 8
Info: 'The INIT's name is stored at a location $16 bytes (22 decimal) from the address in the PC when you drop into the debugger. '
DITL_-4049.txt
Items: (1 entries)
0:
Bounds: x1=4, y1=18, x2=269, y2=172
Type: 8
Info: 'If you do not want INIT-Scope to execute the next time you turn on your Macintosh, you may turn it off from the control panel.
INIT-Scope will also not execute if the caps-lock key is down.'
DITL_-4048.txt
Items: (2 entries)
0:
Bounds: x1=17, y1=18, x2=288, y2=112
Type: 8
Info: 'The 'Show Resource Info' option displays every type of resource that each INIT accesses. Some of the resource types shown may be accessed only indirectly by the INIT.'
1:
Bounds: x1=17, y1=119, x2=290, y2=202
Type: 8
Info: 'This information is also available from the trap history portion of the report (just not as organized). So you won't generally use this option.'